GT86 / GR86 Wisefab V2 Rear Suspension Drop Knuckle Kit.
The GT86 rear V2 kit is made of high strength steel. It is a bit heavier than the V1 kit, but it is stronger, stiffer, and has more adjustment options and improved features. Additionally, an optional MOD-kit can be added to V2, allowing you to further enhance grip and add extra speed to your car.
Toyota GT86 / Subaru BRZ / Scion FRS is a well-designed car for enthusiast drivers. The car performs well on the streets and can be driven fast on a race track. If the focus is more towards performance, then the car will drive even better with lowered ride height, but then the factory-designed kinematics won’t work as they are supposed to. The Wisefab suspension kit brings the roll center, bumpsteer, anti-squat, and camber curve back to normal range, providing better roll stiffness, handling, and grip.
Features
All knuckles, links, and arms are made of high-strength steel
CrMo rod ends and sphericals are used instead of rubber bushings
Adjustable shock motion ratio
Shock motion ratio can be adjusted by changing the shock's position on the arm. It can be done quickly and has the effect of changing the spring rate. This means that understeer or oversteer can be removed within a few minutes
Easy camber adjustment
Easy bump steer adjustment
Kit includes:
- Pre-set suspension arms
- Knuckles with hardware
- Installation guide
Other information:
- Track 40mm (20mm per side) wider than the original. Please check the halfshaft length!
- This kit assumes coilovers
- The original wheel speed sensor can be used
- Possibility to use with OEM bearing/hub, Nissan S-chassis bearing/hub, or Lexus IS (XE20) bearing/hub
- Minimum rim size is 17“
 |