Red Line Gear Oils and Transmission Lubricants are designed to provide excellent low-temperature shift-ability and improved gear protection at higher temperatures. Red Line Gear Oils will reduce differential temperatures 10-70F. Efficiency improvements between 1-5% are typical. The synthetic base stocks used have tremendous thermal stability and provide the best film strength available. The unique combination of base stocks and additives allow Red Line gear and transmission oils to carry higher loads compared to petroleum lubricants. The stability of these products allow them to be used for extended periods.
These products contain the extreme pressure additives necessary for ultimate protection road cars and racing vehicles, as well as friction modifiers (except NS) for proper limited-slip operation
- Fully-synthetic formulas created from polyol ester base stocks, offer excellent lubrication under extreme conditions
- Ester base stocks and friction modifiers (except NS) provide additional slipperiness to lower operating temperatures by reducing the sliding friction in hypoid gears
- High viscosity-index (VI) to provide relatively constant viscosity and film thickness with varying temperature change
- Superior shear stability and reduced oxidation compared to other synthetics and conventional gear oils
- Exceed API GL-5 specifications
- Engineered to provide the highest degree of protection and improvement of differential efficiency for better mileage, longer drain intervals, and less wear
- Applications include differential oil, final drive oil, gear oil and transfer case fluid
- Contains additional friction modifiers for suitability with clutch-type limited slip differentials - for most LSDs, no additional friction modifiers are required
- This product is not designed for use in most manual transmissions or transaxles with synchronizers, as extreme slipperiness may cause shifting problems
- Known formerly as LightWeight Gear Oil
- Also popular in many Formula racing transaxles, including Hewland LD-200 and FTR sequential
- Satisfies the gear oil viscosity requirements of SAE 75W80, 75W, 80W and 85W, as well as SAE 30 and SAE 10W30 motor oil
Sold as a single quart.
Suitable replacement for:
- API GL-5
- MT-1
- MIL-L2105E
- SAE J2360
- Toyota/Lexus 08885-02506
- Toyota/Lexus 08885-02606
- Toyota/Lexus 08885-81060
- Toyota/Lexus Gear Oil LT/LX
 |