After the success of Z1 Rear Camber Arms, Z1 is proud to announce the release of the Z1 Adjustable Rear Traction Arms.

Z1 Motorsports Adjustable Camber Arms for Nissan 370Z and Infiniti G37 models add rear suspension adjust-ability to help improve alignment for handling throughout various driving conditions or to get your car back to OE alignment specs after lowering. With over a year in development and testing, Z1 Motorsports is now proud to offer a fully adjustable and customizable Camber Arm solution for the Z and G chassis. A thorough examination of the factory suspension as a system and on a component basis led to our approach. After testing the many options available on the market, and finding common shortcomings, "issues" and failure points, we decided that a no-compromise approach was the solution. We set forth an extensive list of design goals and product requirements; we believe it has led us to nothing short of the best part available for this application.

Inspected, assembled, re-inspected, and packaged in house by Z1's trained staff, the adjustable traction arms arrive ready to install on your Z right out of the box.  A professional alignment is strongly recommended after the installation of the arms.

Standard Traction Arm Components

• Body - Machined from solid, billet 6061 Aluminum and hard anodized black; the fluid design is not only aesthetically pleasing its form is completely functional. Clearance will not be an issue through the full range of suspension travel. With a steel mounting fork and all aluminum body, Z1 Traction Arms are not only durable but aesthetically pleasing as well.
• Adjustment - Utilizing a turnbuckle-style adjuster means small precise adjustments can be made from under the car without removing or loosening any other suspension components. Simply loosen the jam nuts and turn the aluminum body to shorten and lengthen the arm.
• Jam Nuts - Wide jam nuts are used for increased access, making adjustments simpler. Zinc plated for corrosion protection.
• Modular Design - Z1 Traction Arms use a fully rebuildable and modular design, allowing you to change between urethane street and race solid inner joints as you desire.

Optional Race Upgrade

Much like our Front Upper Control Arms, we also sell a 'Race' version of our traction arms. These feature a solid heim joint design with included spacers. These remove all possibilities for bushing flex, maximizing performance, and providing the most direct and uncompromising driver feel. Because of the added stiffness, drivers will notice much higher vibrations and noise. Customers not comfortable with or are concerned about the increase in harshness or noise should purchase the STREET Version.

NOTE: On cars lowered more than 1'', we recommend using aftermarket Eccentric Bolts or Camber Arms to allow a greater range of toe/camber adjustment. Without these you may not be able to align toe and camber within factory specifications.

*** This item does not qualify for any additional discounts or promotions ***