SPC Performance Control Arm Hardware Kit for 2010-2024 Toyota 4Runner models

The front upper control arm mounting bolts on many Toyota truck and SUV models are frequently corroded and must be cut out when removing or replacing the control arm. This hardware replacement kit allows quick and easy re-installation of the upper control arm. This long bolt and nut kit will service the control arm hardware on one side of the vehicle. Order two kits to replace both sides.

Cam Bolts: Caster and camber adjustments can be made easily by installing this kit. By replacing the stock alignment washers on the upper control arms, lower control arms, or other suspension locations, caster and camber can be adjusted by turning the cam nuts to obtain the proper readings. These cam kits give you the full range of caster and camber adjustment and once installed can make alignment changes for the life of the vehicle.

Cam Plates: For vehicles which have very little clearance to adjust the camber and caster with the OE adjusting cams. These specially designed adjusters replace the OE adjusters, and feature fast and easy “on-the-vehicle” adjustments. The unique design saves time by installing onto the OE bolt – no need to replace the bolt – and allows for quick future adjustments. 

Features and Benefits

• Cam bolt kit is a replaces OE adjusters
• OE bolts are frequently seized and can't be adjusted
• Get up to 1.5 camber and caster change