RaceQuip Camlock FIA 6-Point Pull-Down Harness with the 2in Lap Belt.
RaceQuip's FIA 8853-2016 auto racing harness sets are designed and built to deliver the "Best Value in Safety", just like the rest of the product line. These FIA Pull-Down Lap Camlock style seat belt sets meet that challenge by offering loads of features at an affordable price. RaceQuip's FIA series Camlock belt sets utilize black oxide coated drop forged steel hardware for great looks and long service life. The six-point configuration incorporates a comfortable dual 2" wide moustache bar crotch strap design that is adjustable to 24" in length. The lap belt is a "pull-down" configuration which means that you pull the lap belt straps down and away from the cam buckle to tighten. The 3" wide lap belt is adjustable from 22" to 60" in length and has sewn ends with snap hooks and eyebolts installed. The individual shoulder belts are 3" wide and can be adjusted from 20" to 68" in length. This harness set meets the stringent FIA 8853-2016 standard which allows racers in some sanctions to use them for five years before replacing. Construction starts with a lightweight magnesium alloy dual direction cam buckle. The buckle features an engagement cone which allows the belts to snap into the cam mechanism at angles of 21? Degrees left or right and 11 degrees up and down for ease of engagement.
Features:
- FIA 8853-2016 Certified
- Premium Smooth Mono Filament Polyester Webbing
- Pull Down Style 2" Lap Belt
- 6 Point Design - Dual 2" Crotch Strap
- Dual Direction Magnesium Alloy Cam Buckle
- Snap Hook Ends and Eyebolts Installed
- Shoulders Adjust from 10" to 73"
- Lap Belt Adjusts 22" to 60"
- Premium Aluminum Shoulder Adjusters
- Wide Engagement Cone For Easy Snap In
- Cam Buckle Stays on Crotch Strap
- Black Oxide Coated Drop Forged Steel Hardware
- NOT D.O.T. / FMVSS Certified for on Highway Use
Specifications:
| Brand |
RaceQuip |
| Certification Rating |
FIA 8853-2016 |
| Emission Code |
6 |
| Latch Style |
Camlock |
| Number of Mounting Points |
6-Point |
| Size |
3 in. to 2 in. HANS/FHR Shoulders |
| Part Number |
855005RQP (Black) / 855015RQP (Red) |
NOTE: RaceQuip motorsports harness sets and seat belts are NOT D.O.T. / FMVSS 209/302 certified for on highway use. They are only to be used in racing vehicles off of public streets and highways. All racing harness sets are designed to be mounted in a race vehicle to a rollcage or harness bar - if you do not have either, you should not try to install any RaceQuip harness set or seat belts.
 |