2020+ GR Supra CCV Side Baffled Oil Catch Can Kit.
The Supra is back! This means that now is the perfect time to add a layer of protection to your B58 with the Mishimoto 2020+ Toyota Supra Baffled Oil Catch Can. The tag-team between Toyota and BMW resulted in a sleek new look for the A90 Supra, teeming with power, technology, and efficiency. However, the inevitable side effect of blow-by still found its way to this Supra, which will lead to carbon build-up on the intake valves, eventually slowing this Supra down.
Their catch can kit utilizes the proven engineering from the patent-pending Mishimoto 2-Port Compact Baffled Oil Catch Can complete with its 50-micron bronze filter and internal baffle to better separate the oil and fuel from crankcase vapors. The compact catch can is constructed from 6061 aluminum and sealed with Viton O-rings to stand up to anything the Supra can throw at it. This can mounts in line with the B58's CCV system and defends the intercooler, intake system, and VANOS system from carbon build-up and helps maintain proper octane levels to reduce potential detonation.
The Mishimoto Toyota Supra Catch Can Kit includes two pre-molded, direct-fit hoses which require no modification to tie into the Supra's CCV system. This kit also includes a specially designed, hard-line drain system, complete with a threaded drain plug for simplified servicing and long-lasting protection for your Supra. Like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty!
Mishimoto's catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, the catch cans are not heated. This means that all of the blow-by can condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while their catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what we've seen in the bottom of catch cans, you won't want that draining back into your oil either.
Features:
- Direct fit for 2020+ Toyota Supra 3.0L
- Application-specific bracket mounts the can in a serviceable location
- Application-specific lid designed so fitting size matches CCV line size
- Defends intercooler, intake system, from oil blow-by
- Internal air diverter increases air turbulence to improve oil separation
- Single 2-Port Compact Baffled Oil Catch Can separates oil particles using 50-micron bronze filter
- Direct-fit hoses allow for installation with no modification to engine cover
- Billet 6061 aluminum sealed can
- Helps maintain proper octane levels to reduce potential detonation
- Filters and can are fully serviceable
- 22 in-lbs (2.5NM) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in- 2-3NM. Do not exceed the maximum torque rating of 27 in-lbs (3NM).
Includes:
- (1) Compact Baffled Oil Catch Can
- (1) Application-Specific Mounting Bracket
- (1) Application-Specific Drain System
- (2) Direct-Fit Hoses
- (2) Repalcement OEM Quick Disconnect O-Rings
- (2) 3/8-in Aluminum Barbed Fittings
- (4) Worm Gear Clamps
- Mounting Hardware
- Mishimoto Lifetime Warranty
Fits:
Note: After installation, Mishimoto recommends checking the contents of the baffled catch cans every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle
 |