aFe CONTROL Stage-1 Suspension Package for the 2020+ Toyota GR Supra.
The Supra is back! Out of the box, it does a lot of things well. However, it does exhibit some shortcomings. One thing you notice immediately is the numbness in the steering response near the neutral position. The car feels like it hesitates to change direction. Once the car takes a set in a corner, the short wheelbase does make up for the slow-ratio steering, but there is still a driver/car disconnect when initiating a turn. There is also a noticeable amount of body roll. When upgrading to stickier tires, this roll will only get worse. With aFe Control Stage 1 suspension package, you will be able to sharpen steering response and improve initial turn-in. The car will be more agile and feel like a lighter car. Body roll will be dramatically reduced, and the 3-way adjustment (front & rear) will allow you to dial in the handling balance that suits your driving style. Our Stage 1 kit combines our sway bars with higher-rate lowering springs that drop the center of gravity, which will further aid in less roll during transitions. Whether it’s stability on the track or more rotation at the autocross, aFe Control's Stage 1 kit can get you there!
Features and Benefits
- CNC Bent, Lightweight 1026 DOM Steel Tubular Sway Bars
- Ø29mm (1.125”) Front Sway Bar, 3-Way Adjustment
- 405 lbs/in (134% Stiffer than Stock), 455 lbs/in (163% Stiffer than Stock), 510 lbs/in (195% Stiffer than Stock)
- Ø22mm (0.875”) Rear Sway Bar, 3-Way Adjustment
- 130 lbs/in (155% Stiffer than Stock), 145 lbs/in (184% Stiffer than Stock),160 lbs/in (214% Stiffer than Stock)
- CNC Machined Billet 6061-T6 Aluminum Bushing Brackets with Grease Fittings mated to 90A Durometer Polyurethane Bushings
- Eibach PRO-KIT Performance Springs
- Front: 170-205 lbs/in (Lowers -1.7”) Rear: 370 lbs/in (Lowers -1.2”)
- Direct Fit Installation Requires No Modifications
- Made in the USA
Fits
 |