2010 to 2023 Toyota 4Runner ARB / OME Front Coil Spring Set
When undertaking 4X4 remote area travel, the need to carry sufficient fuel, water, vehicle spares and safety equipment invariably means that your 4WD will be fully loaded, placing a lot of strain on suspension components. As part of their integrated 4WD suspension systems, Old Man Emu designs a range of coil springs for each vehicle, enabling the installer to match the most appropriate springs to the intended application. While ride height increases are attained, emphasis is placed on ride control improvements. Further fine tuning is achieved when the springs are matched to a corresponding set of Old Man Emu shock absorbers, delivering a fully integrated system designed specifically to suit your vehicle.
Features and Benefits
OME 2884: These springs are designed for the front of the vehicle with a spring rate of 590 lbf/in and a free height of 390mm. They are suitable for various Toyota models without significant added weight, providing approximately 2.5" of lift with factory weight.
OME 2885: This is a front spring with a 590 lbs/inch spring rate and a free height of 395mm. These are intended for vehicles with some added weight, such as a bumper, providing 2.5-3" of lift with 100-200 lbs of front armor.
OME 2887: These front springs have a 590 lbf/in spring rate and a 400mm free height. They are designed for vehicles with heavy front loads (200+ lbs of armor) and provide 2.5-3" of lift.
OME 4007: These front springs are part of the OME MT64 system, designed for use with specific OME shocks. They have a spring rate of 588 lbf/in and a free height of 15 inches.
OME 4001: Also part of the OME MT64 system, these front springs are compatible with OME MT64 and Nitrocharger Plus shocks. They have a 588 lbf/in spring rate and a free height of approximately 14.5-15 inches, depending on the side.
Fits
Note: Please ensure the desired spring for your specific application before purchasing.
 |