StopTech recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with StopTech SportStop Cross-Drilled & Slotted rotors. SportStop Drilled & Slotted brake rotors prevent glazing of the pads, add bite, and improve wet and dry braking performance. Every SportStop Drilled & Slotted brake rotor is produced from a high-quality Centric Parts blank casting and finished in a durable e-coating for corrosion resistance.
SportStop Drilled & Slotted rotors look great behind custom wheels, improve the initial bite of the brake pads, and help wipe away the debris that forms between the pad and the disc. A set of SportStop cross-drilled & Slotted rear replacement rotors is a great way to match the aesthetics of a StopTech Big Brake Kit with the cross-drilled & Slotted rotor option.
Every SportStop rotor is finished with black e-coating on both sides of the hat, inside the cooling vanes, and on the outside edge. E-coating is a superior electrostatically applied finish designed to withstand 400 hours of saltwater exposure without rusting. This is especially important on both mounting faces of the hat, where it touches the hub flange and the back face of the wheel. Any accumulation of rust in these areas can lead to installed lateral runout issues.
Power Alloy metallurgy is an exclusive feature of SportStop rotors. In specific vehicle applications, StopTech works with foundry partners to increase the molybdenum or carbon content of the castings and to carefully control the cooling rate during production to reach targets for hardness and tensile strength.
Sold Individually
Features and Benefits
- Premium e-coated rotor with advanced metallurgy that greatly reduces pad squeal.
- Drilled/Slotted Helps Evacuate Gases/Dust/Heat
- Directional Curve Vane Designs On Selected Apps
- Power Alloy Is Descendant Of Patented AeroRotor
- Black E-Coated Non-Friction - Corrosion Protection
- Increased Initial Bite and Wet Weather Response
- Superior Resistance To Cracks From Thermal Stress
- Double Disk Ground For Consistent Friction Surface
- Direct OE Replacement
Fits
- 1996 to 2002 Toyota 4Runner
- 297mm / 11.6-inch brake rotor
Note: The image shown is a representation of the product. While efforts are made for accuracy, the actual part may have slight variations in appearance. For specific details or questions, please do not hesitate to contact us.
 |