3-inch Uniball UCA Lift Kit – Front shock spacers and rear air bag spacers with rear Dirt Logic 2.25 shocks
Fabtech’s high quality Tundra lift kit offers increased height to run 33″ or 35″ tall tires with additional front suspension strength. This kit helps level the vehicle stance front to rear for a more aggressive appearance.
The Fabtech upper control arms are constructed of the finest material with .120″ wall 1.25″ OD 4130 Chromoly steel tubing. High quality 1″ FK Stainless PTFE lined Uniball bearings are utilized in place of the small factory ball joints and allow for increased travel without bind. These super stout Tundra upper control arms are designed for longevity in rugged offroad conditions while providing a more positive on road feel.
The factory front Coilover shocks receive spacers that provide lift while keeping the stock ride quality. Rear lift is accomplished using a spacer under the factory air bags for the additional ride height. The rear suspension receives Dirt Logic 2.25 shocks for a balanced ride.
Features and Benefits
- Arms eliminate the upper ball joint with super-strong 1″ ID Stainless American Uniball
- Chromoly tubing reduces flex found in stock arms for a more positive road feel
- 17-4 Stainless Steel Heat treated Uniball pin fits into the factory ball joint taper without modification to the spindle
- Retains stock front Coilover shocks for a factory ride
- Perfect system for the daily driver that wants increased clearance to run 33″ or 35″ tires
- 5 Year 60,000 Mile Powertrain Warranty
Dirt Logic 2.25 Shock
Dirt Logic 2.25’s are designed to replace factory shocks with a larger, more robust configuration. The 2.25 size is what separates it from other replacement take-apart shocks for a superior ride, both on and off road. Shocks are pretuned for each Fabtech suspension, accounting for larger tires, providing the finest all around damping.
- 2.25-inch OD Stainless Steel Body
- 2.0-inch OD Billet Aluminum Piston
- 7/8-inch NitroSteel® Black Piston Rod
- Polyurethane Mounting Ends
Fits
Note: The image shown is a representation of the product. While efforts are made for accuracy, the actual part may have slight variations in appearance. For specific details or questions, please do not hesitate to contact us.
 |