2010 to 2015 Toyota 4Runner Fabtech 6" Performance System with Front Dirt Logic 2.5 (Resi) Coilovers and Rear Dirt Logic Shocks - 4WD No KDSS
This Toyota 4Runner suspension system features Fabtech’s proven IFS technology with extended length ductile iron steering knuckles for proper electronic stability control functionality. Heavy-duty 1/4" thick steel lower control arm crossmembers provide superior ground clearance, while the integrated front differential skid plate adds protection to the drivetrain for off-road use.
Option: The front suspension is controlled with Fabtech’s legendary stainless steel Dirt Logic 2.5 Resi Coilovers for outstanding damping capacity with a superior highway ride.
Rear lift is accomplished with steel coil spring spacers that retain the Toyota 4Runner coil springs for a smooth ride. Heavy-duty Fabtech control link arms replace the factory arms to re-position the tire in the wheel well with the additional ride height. A stout 1/4" thick steel bracket relocates the rear Track Bar to keep the vehicle tracking properly. Rear shocks include the Dirt Logic 2.25.
Features and Benefits
- 6" Lift
- 1/4" thick steel drop brackets
- Integrated differential mounts
- For 4WD Models without KDSS
- Skid plate is constructed of 1/4" thick steel
- Extended length ductile iron steering knuckles
- 1/4" thick steel lower control arm crossmembers
- For Models compatible with M12-1.25 Caliper Bolt
- Repositions the factory front and rear 4Runner brake lines down on the frame
- Coilovers built with a 2.5" stainless steel body and 7/8" NitroSteel® piston rod
Front Dirt Logic Resi 2.5 Coilovers
Built with a 2.5" stainless steel body and 7/8" NitroSteel® piston rod, these coilovers provide maximum corrosion resistance and durability for the most aggressive driving conditions. The cold wound coil springs provide proper load carrying capacity with the ability to cycle at full travel. A remote aluminum reservoir dissipates heat for continuous damping when driving over extreme terrain at high speed. Ride tuned to provide exceptional damping for off-road with a premium highway ride.
Fits
- 2010-2015 Toyota 4Runner 4WD w/o KDSS; M12-1.25 Caliper Bolt
Note: *for 4WD models without KDSS; must have M12-1.25 Caliper bolt
 |