These ramps are 56" in length with an 8" rise. This ramp will accommodate most low profile cars with up to 11" wide tires. This ramp is made from special EPS foam with a special anti-skid coating.

Ramps are 56 " long and 12" wide with a 8" lift height and a low 10.8 degree incline. One set supports 3000 lbs. Includes handy straps for carrying and storage. The 2 pc. design allows removal of the bottom portion of the ramp for easier side access ,once car is set on ramp. At only 15 lbs each working with these ramps is a breeze. These ramps never scoot, slip or slide while rolling onto the ramps. This means these ramps are easy to drive up on and are very safe. Our Schwaben ramps will never scratch or blemish your floors either.

Please see handy chart below to see if our 56" Low Profile Schwaben ramps are right for your vehicle!

How to measure your car for fitment.

1. Take a yard stick, wedge it under the front inside edge of the front tire.

2. Raise the yard stick up until it hits the underside of your car.

3. Measure from the tip of the yardstick to the ground, vertically.

If your measurement is 7.25" or greater, you can clear the ramps without a problem.

Note: For an even lower profile use our 006174SCH01A extensions with these ramps.